Skip to content

CeRam Kote 426 Ceramic - 1 Gal Kit

$277.48
SKU CK426-1G

CeRam-Kote 426 is a unique ceramic coating that prevents corrosion in water service applications. It is designed to work as a barrier coat in combination with Coppercoat anti-fouling as well as a potable water coating. This highly modified resin system has been injected with a one-of-a-kind infusion of ceramic particles to improve performance and provide exceptional protection. 

Applications:

  • Marine vessels
  • Potable water systems

Does your project need a lot of this product, then contact the customer support team today: 

(800) 567-5358

SOLD IN A 1-GALLON UNIT KIT THAT INCLUDES PARTS A & B.  NO RETURNS FOR CERAM KOTE PRODUCTS.  

Mix at a volume ratio of 2 parts A to 1 part B by weight or volume. Do not apply if temperatures are below 40*F.

PRODUCT SPECS

RUBBERIFIC - PLAYGROUND SWING MAT

SHIPPING TIME

Call (800) 567-5358 for pricing and logistics questions 

Note by default all CeRam-Kote orders ship from our centrally located Texas warehouse where a full stock of ceramic coating products are maintained.

Most orders ship out 2-3 business days following the order depending on stock levels. Delivery times shown on the shipping map are typical, though not guaranteed.  

SHIPPING MAP

NUMBER OF COATS

Two Coats (each coat 8-10 mils, 200-250 microns)

CURE TIME

After thoroughly stirring CeRam-Kote® 426, strain it with a standard paint strainer and pour CeRamKote® 426 into the spray equipment. Apply a first pass of eight (8) to ten (10) mils (200-250 microns) WFT. At 72°F (22.2°C), 30-40 minutes is sufficient time for waiting for first pass to set. Apply a second pass of eight (8) to ten (10) mils (200- 250 microns) for a total DFT of sixteen (16) to twenty (20) mils (400-500 microns) DFT. 

Cure time is temperature dependent. Apply additional mils without incurring runs or sags if the finished product requires thicker coverage. Whenever possible, apply second coat in a cross-coat method.

SURFACE PREP

Bonding strength depends on proper preparation of the surface to be protected for long-term performance of the product. The substrate should be free of oil, grease and salt/chloride contamination. Specifications call for a white metal (NACE 1, SSPC-SP5, Swedish Standards SA-3) finish with a 1-2.5 mil (25-62.5 microns) anchor profile. Surface preparation should be no less than a near white (NACE 2, SSPC-SP10, Swedish Standards SA 2½) finish. 

Cleanliness is the most important step to produce a coated surface that will perform and last. Call CERAM-KOTE® COATINGS INCORPORATED for surface preparation recommendations of materials such as aluminum, brass, plastic, fiberglass and/or concrete.

STORAGE & SHELF LIFE

Pot life for CeRam-Kote® 426 at 72°F (22.2°C) is approximately 30 minutes. Colder temperatures will increase the pot life and warmer temperatures will decrease the pot life. Keep cans out of direct sunlight to prevent heat buildup. Preferred storage/usage is a dry enclosed area under 85°F (29°C). Shelf life is two (2) years.

RELATED PRODUCTS

CeRam Kote 54 Ceramic Protective Coating
CeRam Kote 54 Ceramic Protective Coating
CeRam Kote 54 Abrasion & Corrosion Resistant Ceramic Coating - 1 Gal Kit

CeRam Kote 54 Abrasion & Corrosion Resistant Ceramic Coating - 1 Gal Kit

$237.09
CeRam Kote 426 coppercoat antifouling paint
CeRam Kote 426 coppercoat antifouling paint
CeRam Kote 426 Ceramic  - 1 Gal Kit

CeRam Kote 426 Ceramic - 1 Gal Kit

$277.48
Ceram Kote 2000 chemical resistant ceramic coating 1 gallon
Ceram Kote 2000 chemical resistant ceramic coating 1 gallon
CeRam-Kote 2000 Logo

CeRam Kote 2000 Internal Pipe and Tank Coating - 1 Gal Kit

$235.68

TRYING TO MEET A SPEC?

WE CAN HELP!

QUESTIONS?

Call (800) 567-5358
or Email
Monday - Friday 8AM - 5PM PST

SHIPPING NATIONWIDE

*Contiguous 48 States Only