Skip to content
FREE SHIPPING ON ALL CONTINENTAL US ORDERS OVER $100
FREE SHIPPING ON ALL CONTINENTAL US ORDERS OVER $100

ITC 100 HT Ceramic Refractory Coating for Forge or Furnace

by ITC
$72.48
SKU 100HT
Size

ITC 100 HT product is a high-temperature coating with a rating of up to 5000°F that has been shown to provide exceptional refractory protection and energy savings. The coating is utilized as a covering for refractory brick, castable, or ceramic fiber insulation. In particular, this is used in forges, kilns, and furnaces. For kilns, it minimizes glaze sticking. 
NOT suitable for food-grade applications such as pizza ovens

ITC-100 treatment coatings typically equate to one inch of insulation. 

Available in Pint, 1-gallon, & 5-gallon sizes

This coating reflects radiant heat back into the furnace to reduce heat loss. The refractory capability saves money by retaining heat inside of the kiln and takes less fuel to operate and less time to achieve a high temperature of 4000-5000 degrees Fahrenheit.

Usage: 100HT can be used by itself or as a base coat, depending on the application, and used over castable refractory or ceramic fiber-lined furnaces.

  • Reflectivity occurs around 900*F and becomes more efficient until the maximum temperature is achieved.
  • Coverage: 6-12 square feet/pint
  • Rated for up to 5,000 degrees F
  • Save up to 60% on energy heating costs

100HT Pint Container Usage rates by application:

  • Fiber Lining: 5 square feet
  • Brick Lining IFB (Insulating Fire Brick): 10 square feet
  • Brick Lining or Hard Cast Refractory: 6-12.5 square feet

FREE SHIPPING  

Looking for a quote for your project? (800) 567-5358
Project Quote Form Here>

PRODUCT SPECS

Details: 

  • Made in the USA 
  • Can be applied with spray gun

ITC HIGH TEMPERATURE COATINGS

WHAT IS ITC 100HT CERAMIC COATING?

100HT ceramic coating is a type of coating applied to surfaces to protect them and improve their performance. Ceramic coatings are typically made of inorganic, non-metallic materials, such as silicon carbide or aluminum oxide, and they are known for their durability, hardness, and high-temperature resistance.

Specifically the 100HT ceramic is known for its high-temperature resistance. The "HT" in the name stands for "high temperature," and the coating is rated for up to 5,000 degrees Fahrenheit. This makes 100HT ceramic coating an ideal choice for applications where the coated surface is exposed to high temperatures, such as in the automotive, aerospace, or manufacturing industries.

This coating is typically applied to surfaces using a spray, brush, or roller, and it is allowed to cure before it is put into use. Once applied, the coating creates a hard, durable layer that can protect the surface from wear, abrasion, and high temperatures. It is also resistant to chemicals and UV radiation, which makes it a durable and long-lasting coating option for a wide range of applications.

Common industry applications:

  • Energy and power generation: High-temperature and abrasive resistant coatings are used in the energy and power generation industry to protect the surfaces of turbines, generators, and other equipment from the high temperatures and abrasive conditions encountered during operation.
  • Manufacturing and industrial environments: In manufacturing and industrial environments, high-temperature and abrasive resistant coatings are used to protect the surfaces of machinery and equipment from wear and tear, as well as to improve their performance and extend their lifespan.
  • Chemical processing: High-temperature and abrasive resistant coatings are used in the chemical processing industry to protect the surfaces of tanks, pipes, and other equipment from the corrosive effects of chemicals and high temperatures.
  • Automotive and aerospace industries: High-temperature and abrasive resistant coatings are often used on the surfaces of automotive and aerospace components to protect them from the extreme temperatures and abrasive conditions encountered during operation.

100HT INSTALLATION INSTRUCTIONS & TESTING DATA

Installation

  • ITC 100HT can be used as a final coat over ITC ITC 213, ITC 148 and ITC 200EZ. ITC 100HT can be used as a stand-alone product if applied over hard refractory, brick or ceramic fiber.
  • Remove and repair all loose and weakened brick and hard refractory. 
  • Remove all dust from previously ITC coated and dried surfaces. Remove all debris, dust and grease from interior walls, doors, crown, floor and grooves.
  • Prepare the ITC 100HT for spraying per the mixing instructions by adding ½” container of water to one full container of ITC 100HT.
  • Spray entire surface with ITC 100HT using a minimum of 80 psi of air pressure. DO NOT RUSH and do not leave any areas uncoated. The thickness of the sprayed coating should be approximately 1/16” to 1/8” thick. The distance of the spray nozzle to the fiber surface should be approximately 16”.
  • DO NOT OVER SPRAY. Too thick of an application will cause material to fail prematurely.
  • Allow to dry overnight.

ITC 100HT Thermal Testing Application Data

ITC 100HT Ceramic Testing Data Chart

Installation Notes:

NOTE: Do not use excessive heat to dry the coating during the first 24 hours after installation. Either use fans to move the air or simply leave it to dry overnight. The first firing should be started with low heat at first for approximately six hours. Do not exceed 600 F

** After the spraying process is complete, the operation of any enclosed furnaces MUST BE REPROGRAMED to prevent over firing the furnace.**

SHIPPING TIME

Call (800) 567-5358 for pricing and logistics questions 

Note by default all ITC 100HT orders ship from our Florida warehouse where a full stock of Refractory ceramic coating products are maintained.

Most orders ship out the next business day following the order depending on stock levels. Delivery times shown on the shipping map are typical, though not guaranteed.  

SHIPPING MAP

MANUFACTURERS DISCLAIMER

NO WARRANTY IS EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THIS INFORMATION, THE SUITABILITY OF THE ITC 100HT PRODUCT FOR A PARTICULAR PURPOSE, OR THE RESULTS TO BE OBTAINED BY THE USE OF THE PRODUCT. USERS EXPRESSLY ASSUME ALL RISKS AND LIABILITIES ARISING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION.

TRYING TO MEET A SPEC?

WE CAN HELP!

QUESTIONS?

Call (800) 567-5358
or Email
Monday - Friday 8AM - 5PM PST

SHIPPING NATIONWIDE

*Contiguous 48 States Only